Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent Before full application of Cuprinol Garden Shades, we always recommend testing a small area first, before beginning any project to ensure that you are happy with the colour and overall look of the finish. Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. Don't apply in temperatures below 5°C, in damp conditions or if rain is likely before the product has dried. Low air temperature and or high humidity may prolong the overall drying time of the product.

Be mindful that it is waxed-enriched and that once these waxes are dried, they act to repel liquids, which would include an additional coats. Don't try to coat the whole project with one coat before getting onto the next coat. Instead it is better to paint sections in in time chunks of 2-4 hours. A. It depends on how long ago your shed and fence panels where oiled. Cuprinol Garden Shades paint is a water based product so any remaining oil or wax from previous treatments will likely repel the paint. If the timber hasn't been treated for a couple of years it may be OK. In situations like this we always recommend a test area before starting the main project to test adhesion.With a promise of 6 year weather protection on wooden surfaces, this water based paint takes approximately 8 hours to dry and covers up to 12m² per litre on average. Easily applied with a brush, roller or sprayer, this beautifully designed paint is available in 2 sizes including Cuprinol Garden Shades 1L and Cuprinol Garden Shades 2.5L. For optimum results, a maximum of 2 coats is generally required. Shake contents of the tin thoroughly before decanting into Cuprinol Spray and Brush sprayer (not suitable for use with the Cuprinol Power Sprayer)

As Garden Shades often goes on directly to the wood, without a primer, sometimes it will soak deep into the wood and this can create the need for a third coat. This may be noticeable with rougher woods, open end grains or indeed deep colours. If wood has been exposed and dried out for a long period of time, this may also draw the more of the product away from the surface and into the wood structure. Available in an extensive range of cuprinol garden shades colours, it provides a beautiful overall matt finish, and contains special pigments ensuring a rich colour and allowing the natural texture of the woodgrain to shine through underneath.Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application. Stir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.