Wärmer System M10 x 15mm Copper Tap Tails for Monobloc, Basin and Sink Mixers,Tap Tails Connector for Mixer Taps,Flexible Tap Tails Replacement

£9.9
FREE Shipping

Wärmer System M10 x 15mm Copper Tap Tails for Monobloc, Basin and Sink Mixers,Tap Tails Connector for Mixer Taps,Flexible Tap Tails Replacement

Wärmer System M10 x 15mm Copper Tap Tails for Monobloc, Basin and Sink Mixers,Tap Tails Connector for Mixer Taps,Flexible Tap Tails Replacement

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Most include both parts and labour (so we'll send an engineer to fix the problem as part of our guarantee). But it's a bit of a minefield actually as I've found that Victorian Plumbing and Tap Warehouse seem to list much higher flow rates than what the manufacturer's data sheets say in many cases.

The Armitage Shanks Contour 21+ Single Lever Basin Mixer Tap with copper tails is an anti-vandal unit ideal for installation within any commercial or domestic space. Designed and manufactured for all commercial applications where functionality includes; water saving; anti-vandal outlets; temperature limiting device; nickel free waterways, self draining spout to reduce risk of bacterial growth in static water.

The larger two of these holes are for the feed pipes to be screwed in and the smaller two are where the threaded connection bars are screwed into.

With the washer in place the nuts can now be tightened onto the threaded bar and this is where the DIY enthusiast struggles. Some of our partners may process your data as a part of their legitimate business interest without asking for consent.The only other thing you can really do is source a monobloc tap with screw down taps, not 1/4 turn type. Additionally, while the water is off it’s a good idea to fit isolation vales for any work you may need to carry out in the future. This range of brassware offers simple installation, ease of use, reduced risk and water saving features. When fitting these taps (especially on stainless steel sinks), I'd like to do away with the flexi's in favour of copper tails to give the tap some stability. Copper tails, which are narrower where they go through the tail, increasing to 15 mm at the pipework connection end.

A large, flat rubber washer is placed on the underside of the basin and this has holes in it which should line up with the holes in the monoblock. The monoblock is a very clever piece of design technology which allows both the hot and cold feed to enter the base, or block of the tap. We and our partners use data for Personalised ads and content, ad and content measurement, audience insights and product development. It comes with extended lever handle making it particularly suitable for installation in any healthcare or disabled toilet room setting.Please note that proof of purchase will be required to arrange a claim and/or to arrange a visit by one of our expert Bristan Care engineers. A new stylish design featuring Inta’s proven anti scald technology a safe touch body and a self draining spout. If you do not have any isolation valves handy to cut off the water supply while you carry out your work then you will have to ensure that the water is turned off.

If your basin is designed for a monobloc tap, it will have a single tap hole, so you don't have the option to convert to separate taps unless you change the basin. It has M10 connections and the flexi tails included - but they look like they will still be restricting flow somewhat as the aperture of the tails is pretty small especially at the compression nut end.

all the monoblocs I've fitted have come with smooth wall tails, can't bend 'em or nowt so only practical way is to solder. There should be a large rubber O ring which sits underneath the block and is squashed between the top of the sink and the underside of the block as the monoblock is tightened into place. Fitted with a 5 litre per minute flow regulator, this model offers excellent water-saving properties as well as a built-in self-draining spout to reduce the risk of bacterial growth from static water. Their technical excellence makes the most reliable, fit for purpose brassware products in the market today. If you measure from the base of your cold water cistern to the floor, and from the outlet of your tap to the floor, subtracting the second measurement from the first (in metres) and dividing by 10 will give you a rough approximation of the pressure you have available.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop