Check telecom services with Line 1 continuity and polarity testing on the IntelliTone Pro 100 and 200 Toners. All of this in one tool which has been designed for ease of use, featuring a thumbwheel switch, LED display and auto power down with a hard robust exterior. The verification of the correct patching and connection, including datacom or telecom services, can be performed prior to the computer or phone being present. It eliminates the need for both a toner to a wiremapper, and provides 100% confirmation that the right cable has been located.

The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. That means it’s equipped with the most powerful cable location and verification technologies for any work environment – even active networks. The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner and probe to offer digital and analog signaling all in one network toner and probe.

Isolating cables with traditional tools requires guesswork, training, time for repeated testing – and even the best efforts often result in mistakes.

Once located, the office wiring can be verified for shorts, opens and mis-wires using a standard 110 to 8-position patch cable and the Cablemap feature on the IntelliTone Pro 200 probe.IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires such as opens, shorts or reversed pairs. If the open LED is extinguished, the toner is detecting a connection across the center pins of the jack. When this happens, the tone will change its cadence to indicate that the correct pair has been located.

The block may be directly connected to the PBX if this is the MDF, or cross-connected another location if this is an IDF.Fluorescent lights, machinery, computer monitors and electrical wiring all produce noise that slows down cable location. This provides technicians a decisive way to identify individual wire pairs before punching them down or when diagnosing voice transmission problems. SmartTone analog toning eliminates frustrating guesswork locating individual wire pairs during installations.

The smart digital signal processing in the IntelliTone™ Pro Probe clearly identifies this signal with audio and LED visual indicators, allowing you to rapidly isolate the correct cable from a bundle or on a patch panel. Some PBX lines generate signals in the operating frequency of IntelliTone as seen by the SYNC LED flashing red.

This solution allows the most elusive, hidden or bundled voice/audio, data and video cables and wire pairs to be located and isolated quickly and reliably, even on active networks. The presence of Ethernet indicates the connection is active and best located on the patch cables from the patch panel to the switch. Cabling installations have become increasingly complex, which has made cabling increasingly difficult to locate with traditional technologies. LEDs clearly identify common services found on today's networks, including telecom and datacom services and 10/100/1Gb Ethernet links. One cable might carry the original signal; other cables might carry the signal as a result of bleed.