Mapei 110 UltraColor Plus Manhattan Grey Grout 2kg

Product Information

Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface.

After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner (e.g. Keranet), by following the relevant instructions, at least 24 hours after grouting the joints. Only use Keranet on surfaces which are resistant to acid, and never use it on marble or limestone material. AB, DD, IV, KW, PH, FK, FY, TR, PA, KA, LL, PO , SA, CA, DG, EH, EX, G, LD, ML, PL, SY, TA, TD AND TQ. Final cleaning of the powdery film of Mapei Ultracolor Plus from the surface may be carried out with a clean, dry cloth. You must be available to accept delivery on the date you have requested, failure to do so will result in paying for a re delivery charge.Mapei are industry-leading tile grout manufacturers with a focus on delivering high-quality products that are also easy to use, even if you’re a novice tiler. With a diverse range of tile grout options available to buy online, we have everything you need to complete your tiling project and ensure you’re left with a professional-looking finish. Why use tile grout? Sponge down the area: using clean water and a damp (not wet) sponge or sponge float, wipe down the tiles and grout lines to remove the remaining grout, ensuring the grout lines have a smooth, even finish. Tiles Direct is your one-stop tiling shop, which means we won’t just help you find the perfect tile for your interior design project - we also have a raft of additional tiling accessories, including Mapei tile grout, to ensure you get a professional and long-lasting finish. In areas that may need added protection against stains and chemicals, such as countertops or high-traffic areas, we’d recommend investing in the Mapei Kerapoxy or Mapei Kerapoxy CQ grout. Both tile grouts provide exceptional resistance to acids and boast stress-free cleanability, meaning you can keep your grout lines looking clean and colourful with ease.

All Mapei grouts deliver premium performance, but they aren’t necessarily all equal. Some Mapei tile grouts boast different properties, making them better suited for use in particular environments. After laying any tiles, you’ll need to choose the right tile grout to help you complete the job and seal your tiles from dirt and moisture - and this is where we can help, too. If the cleaning operation is carried out too soon (the mix is still too wet), some of the mix may be removed from the joints. If grouting is carried out in extremely hot, dry or windy weather, we Remove excess grout: with a dry sponge, wipe away any excess grout to make sure all the gaps are completely filled. Make sure you don’t scrub hard with the sponge though, as this could pull grout out of the grooves.Mapei Ultracolor Plus does not contain Portland cement and must not be mixed with gypsum or other hydraulic binders; never add water to the mix once it has started to set. Obstructions e.g. steps, lifts, gravel paths and drives etc may mean the delivery will have to be made to the nearest available location to the delivery vehicle. Mapei Fuga Fresca: to keep your tile grout refreshed and its colour intact, look no further than Mapei’s Fuga Fresca resin-based grout paint suitable for grout on walls or floors. Minimise water absorption and make tile and grout cleaning a breeze, with colour options including white, grey and silver Mapei Ultracolor Plus Tile Grout is made up of a blend of special hydraulic binders, graded aggregates, special polymers, water repellent admixtures, organic molecules and pigments.

When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout. All Mapei Ultracolor Plus grout colours are also available in a matching silicone – Mapesil AC Silicone. If using this grout with moisture sensitive natural stone tiles, a low modulus silicone is advised – Mapei Mapesil LM Silicone. If you don’t have a colour preference, or hadn’t realised there were numerous options to choose from, the Mapei grout colour chart below can help you to visualise the different shades before you buy.Mapei Ultracolor Plus creates water repellent grout joints that have excellent colour uniformity. All colours are resistant to UV rays and atmospheric agents. For Mapei, “zero impact on climate change” means that CO 2 emissions measured throughout the life cycle of ULTRACOLOR PLUS using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity. Delivery charges vary for the following postcodes and will be delivered between 5-7 working days to the following postcodes: GY, HS, IM, IV41,IV30, IV42, IV44 – 49, IV55, IV56, JE, KA27 – 29, KW1 – 14, KW15 – 17, PA21 – 38, PA20, PA40+, PH9, PH15 – 20, PH32 – 44, PH49, PH50, TR21 – 25, ZE. For a solid all-in-one grout option, the Mapei Ultracolor Plus Grout boasts excellent water-repelling properties that arere suitable for tile joints of 2mm up to 20mm. It’s also polymer modified, anti-efflorescence and rapid setting - not to mention equipped with anti-mould and drop effect technology, helping to prevent moisture intrusion and erosion over time, wherever you use it.

Preparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation. Mapei Ultracolor Plus forms a smooth, compact finished surface with optimum resistance to abrasion, compression and flexural strength, and good resistance to acids with a pH > 3. Floors are ready for light foot traffic after approx. 3 hours. Surfaces grouted with Mapei Ultracolor Plus may be put into service after 24 hours. Basins and swimming pools may be filled up 48 hours after grouting.Mapei Ultracolor Plus is suitable for grouting walls and floors in areas that are subject to intense traffic, such as shopping centres, airports, restaurants and other public spaces. It is also suitable for residential use in all areas, such as facades, balconies, terraces and swimming pools. You can use this product in various applications, such as high-traffic and residential areas, and balconies, terraces and swimming pools. Standards & Certification UniBond Ultra Force: these ready-mixed grouts make use of fibre technology for maximum durability, with top protection against moisture and mould to keep your grout looking its best for longer. Colour options include grey and navy blue, infused with glitter to bring sparkle to walls or floors tiled in porcelain, ceramic or natural stone