AVM FRITZ!Repeater 3000 - Repeater - WLAN

Product Information

Travel Tech We’ve tested out dozens of products over the last few years to bring you review of gadgets to take on the move.

At that point I realised that it wasn't going to come good by itself, so worked out that a looong press oof the WPS button ~20 seconds forces a reset. Rebooting the 7590 made no difference. Yesterday? I have been running this for a few weeks actually. I don't understand why https://en.avm.de/fritz-lab/f resh-from-development/fresh-from-development/ still shows an older beta. AVM continue their expansion into the UK with a companion product to their brilliant FRITZ!Box routers that can also be used with any router on the market. The FRITZ!Repeater 3000 is a wireless LAN repeater (wLAN) that can be used to boost your home WiFi signal and eliminate any weak signal issues you’re experiencing. In this guide we show you how to easily connect your FRITZ!Repeater with your FRITZ!Box at the touch of a button (WPS - Push Button Configuration). I’ve tried this in two locations: inside my house in a bedroom and in an outside cabin and the results were impressive in both locations. Location

Mesh Wi-Fi with FRITZ!

If you are using a FRITZ!Box with FRITZ!OS 7 or later, the FRITZ!Repeater is integrated into the Mesh and marked in the FRITZ!Box user interface with the Mesh symbol . The FRITZ!Repeater then adopts all of the settings from the FRITZ!Box, such as Wi-Fi access information and guest access. In the Mesh, your wireless devices automatically connect to the wireless access point that offers the best Wi-Fi reception. In combination with FRITZ! Box WLAN routers and their feature-rich firmware FRITZ! OS 6.90, the FRITZ! Repeater 3000 can be connected to a WLAN mesh network. This guarantees an uninterrupted connection when changing the end device from the connection between router and repeater, even videos or music continue to run smoothly. Alternatively, the repeater can also be connected to the router via a LAN cable and then used as an access point. If you own a FRITZ!Box there are extra benefits, for a start, this will work with the inbuilt mesh networking technology. It will also synch any relevant settings, for example, if you have a guest network set up or a WiFi schedule, you don’t need to set these up again. Improved** When the repeater is integrated into the Mesh by first pressing the button on the FRITZ!Box and then the button on the repeater, successful integration is signaled by the LED on the repeater flashing briefly I just don't understand the inconsistencies. According to Philippe_d, there is now only one firmware version for Fritz products now. /thread/9pl56k49?p=121#r2417

Just set-up access profiles for their individual devices and leave the Wi-Fi on fulltime for everyone else?however; I've found that if it's off and I manually turn the wi-fi on (via a Dect phone or Fritz app) only the wi-fi of the 7490 turns on and the 3000 wi-fi only comes on at the next scheduled on time. Have a bit of a think about it for a moment...............If the 3000 WiFi is disabled, how would it detect the 7490 WiFi is enabled?