Dophee 145mm Long Extended Flat Top Scope Mount Base Riser Weaver Picatinny Rail 20mm

Product Information

These 30mm Tactical Rings from Contessa feature a bubble level on the rear ring, plus the Universal Interface system on each ring cap, which allows additional hardware to be mounted to it. Made in the UK using high grade aircraft aluminium, which is specially selected for its rigidity and resilience to ensure accuracy, each rail is anodised with a very high quality satin black finish. It is similar in concept to the earlier commercial Weaver rail mount used to mount telescopic sights, but is taller and has wider slots at regular intervals along the entire length. Barton Gunworks range of Remington 700 Picatinny rails also feature an inclined base at 20MOA allowing for better use of elevation with your scope. The rails are profiled on the underside to allow for a flush mount on the receiver and match the geometry of the ejection port.

Picatinny Rails - Brownells UK Picatinny Rails - Brownells UK

MDT's Scope Base Picatinny Rails are made of durable 6061-T6 aluminum, with a hard-anodized black finish, designed to make mounting optics easier. If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! The underside of the rails are profiled to allow the rail to be mounted flush on the receiver and to match the geometry of the ejection port.

The team then sent the finished prototype over to Rock Island Arsenal for review and trial, and then to the technical data section to determine if it should be a standard or a specification. This rail has been designed to fit the CZ455 range of rifles, however, it will also fit the legacy CZ452 range too. The rails are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish, with a profiled underside for flush mounting on the receiver and geometry matching of the ejection port. Generally custom made mounts are needed for obscure models, custom built or older guns which Recknagel don't produce standard fitting parts for. citation needed] These were the M16A2 [1] and the M4 [2] modified with new upper receivers where rails replaced hand guards.

UniqueFire Riser Mount Extension Weaver Picatinny Rail Scope

The only significant difference between the Picatinny rail and the similar Weaver rail are the size and shapes of the slots. Here at Optics Warehouse, we supply Picatinny rails in a range of heights and sizes from manufacturers including EGW, Nightforce, Contessa, Recknagel, and Weaver. Whether you are looking for a tactical scope ring, a modern sporting ring or our traditional scope ring with a Picatinny mounting system, Talley Mfg has Pic Rails for all applications and firearms enthusiast with a variety of options and our integral Anti-Cant Indicators. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

This has a complete list of the rifle models we supply rails for, including part numbers, heights and hole spacing. The picatinny rings are made from steel, with blued or chrome finishes and available in a number of size options. Many picatinny rail designs currently on the market are not tight enough and result in the scope moving which can be highly frustrating when zeroing.

Picatinny Rails -Talley Manufacturing - Tactical Products Picatinny Rails -Talley Manufacturing - Tactical Products

Arisaka's new version of the Inline Scout Mount for KeyMod is even stronger and more secure, using BCM's inverted KeyMod screws with twin recoil lugs. These rails feature a 30 MOA incline, providing additional elevation adjustment from your scope, and include a recoil lug on compatible models. If you cannot see the picatinny rail you are looking for, go to our Complete List of Picatinny Rings to see our full range of options. With a 30 MOA incline, these rails provide additional elevation adjustment from your scope, and some models feature a recoil lug integrated into the underside rail profile.

The rails are designed to be mounted flush on the receiver and match the geometry of the ejection port, with a 30 MOA incline for additional elevation adjustment from your scope. MDT's Scope Base Picatinny Rails are designed to make mounting optics on bolt action rifles easier and more precise. The rails are profiled to match the geometry of the ejection port and can be mounted flush on the receiver.