Heavy Duty Ball Bearing Drawer Runners, Under Stairs Storage Drawer Slides (900mm)

Product Information

Because BRASOM considers quality of paramount importance, our range includes only premium ball bearing slides. If the weight is only going to be placed deep in the drawer, these guides can carry approximately 115% = 230kg. Because you have not tightened most of the fasteners hard, you can still position the guides in relation to each other.

This small detail allows the drawer to be loaded more heavily and will deflect less than if you were to mount the guides deeper into the casing, i.

The side wall then still has the possibility to make a small sideways movement, should that be necessary for a perfect adjustment.

Because the drawer slides are identical to each other, you will have to push the peg up on one and down on the other. Undermount runners: These runners are installed underneath the drawer, providing a clean and hidden appearance. We distinguish between ball and roller guides, but for large furniture, only heavy-duty ball bearing drawer runners (900mm) are usually used. Technical data: Ball bearing drawer runners 900mm H53 Producer: Furnica Length: 900mm Height: 53mm Material: Zinc coated steel Material Thickness: 2. rubber cushion cushion, avoid pushing and pulling collision during use, double rows of solid steel balls make the drawer open smoother and quieter.

To achieve this adjustment as accurately as possible, I recommend securing one side wall of the cabinet (or drawer) only when the drawer is in place. This small detail allows the drawer to bear more weight and will prevent it from sagging compared to mounting the slides deeper into the cabinet, further away from the front of the drawer. Drawer Runners, also known as drawer slides, are hardware components used to facilitate the smooth and controlled movement of drawers in furniture, cabinets, and other storage units. After you have pushed the drawer, you may feel a slight resistance when opening, this is the Soft Close mechanism activating. This applies in both retracted and extended position and if the weight is evenly distributed over the length.

Having the packer it will bring the drawer away from hinge or door so when in use it does not hit either door or hinge when the door is fully open. A roller guide, on the other hand, functions by means of rollers (wheels) over a rail and can mainly handle vertical loads.When the drawer or door is pushed to close, the mechanism engages and controls the closing speed, gradually slowing down the movement and bringing the item to a gentle and silent close.